A fixture with an inclination of 0~90° that can work at high speed, can be used for marking, cutting, welding, and engraving
0~90° tilt high-speed working fixture
Can be used for marking, cutting, welding and engraving
Features
◆ Can freely adjust (0~90°) different angles to meet different operating requirements
◆ Two locking knobs on each side of the theme, double insurance.it can be rotated clockwise until locked after adjusting to the required angle
◆ Use professional precision chuck, high precision, good quality, self-centering and long service life
◆ The servo drive motor features high precision, large torque and low noise
Specifications
| Available models | CR-80 / CR-100 / CR-125 / CR-160 / CR-200 |
| Surface finish | Anodized |
| Dimensions | 295.9*285*223mm |
| Axis height | 105mm (horizontal measurement) |
| Maximum load | 30kg |
| Chuck runout | ＜±0.04mm |
| Chuck optional diameter | 80 /100 /125 /160 |
| Connection method | 10:1 gearbox ratio (zero backlash) |
| Power requirements | 24V |
| Power cord length | High-flex three-phase cable (2m) |
| Adjustment angle | 0~90° (freely adjustable working angle |
| Product weight | Max.load capacity: 16.9kg |
| Chuck holding range | |||
| Specifications | Positive grip width range | Positive grip tightness range | Reverse grip width range |
| CR-80 | 2~22 | 25~70 | 22~63 |
| CR-100 | 2~30 | 35~90 | 30~80 |
| CR-125 | 2.5~40 | 38~125 | 38~110 |
| CR-160 | 3~55 | 50~160 | 55~145 |
| CR-200 | 4~85 | 65~200 | 65~200 |
 |  | ||
