中文 EN
Current Position： Home >> Laser Cleaning Machine >> Multi-axes Automated Laser Cleaning >> Multi-axes & Autofocus Laser Cleaner
  • Platform Ver.

    Suitable for mold, small workpiece
    Processing range:520*630*330

  • Ground Ver.

    Suitable for large workpieces
    Processing range: 1120*930*1150mm

Application
  • Uneven Surface Clean

    Detect workpiece’s height through Autofocus. Automatically change focus to clean

  • Stereoscopic Workpiece Clean

    p10.jpg

    Move laser head and motion axes to clean around stereoscopic workpieces

  • Non-standard Workpiece Clean

    p10.jpg

    Edit machining path by teaching demonstaration and perform automated clean

  • Through-Hole Clean

    p10.jpg

    Move laser head and motion axes to project laser into the hole to clean automatically

  • Mark on Any position

    p10.jpg

    Can move laser head and mark at any angle and position

  • Roughten

    p10.jpg

    Can perform repetitive process to roughen the surface

  • Wobble Line Cutting

    p10.jpg

    By wobble line cutting，can cut faster, have higher accuracy and more even edge

  • Rust

    p10.jpg

    With autofocus, can keep laser focus on workpiece, easy to remove rust

  • Oil Removal

    p10.jpg

    Defocus clean，enlarge spot to remove oil

  • Paint Removal

    p10.jpg

    Enlarge laser spot, clean more effecient

  • Dirt

    Don’t hurt substrate

  • Relief

    p10.jpg

    3D laser head, don’t need to move while reliefing

View More Videos
Advantages
  • Teaching Demonstration

    Don’t need 3D model、can perform automatic process

    Move laser head and edit the machining path through Teaching Deconstration. Control teaching pendant or touch screen to simulate machining path. After editting the path, can directly perform automated process

    1. Touch Screen
    2. Teaching pendant
  • 6 Motion Axes

    Can move laser head to workpiece any position and angle

    Coperate with Teaching Demonstration, control X、Y、Z axes, glavo front-back rotate, glavo left-right rotate, rotate disc for workpiece.

    1. XYZ axes move
    2. Front-back rotate
    3. Left-right rotate
    4. Workpiece rotate disc
  • 3D Laser Head Autofocus

    Within autofocus range:
    Can maintain laser focus always on workpieces
    (Don't need to adjust focus)

    Beyond autofocus range:
    Move laser head to make the part which exceeds the autofocus range back to the range

  • Laser Spot Control

    Enlarge laser spot, have higher efficiency for rust, oil clean

Process Mode
  • Static Process

    Laser Head & Workpiece fixed to clean/mark

    1. Static Cleaning
      Specific area cleans Control laser head and motion axes to move to any position and angle
      Repetitive clean Set different parameter for each clean and do repetitive clean on specific area
      Multilevel height clean 3D laser head，can set clean layer for each height directly clean without moving laser head
    2. Static Marking
      Specific area marking Control laser head and motion axes to move to any position and angle
      Engraving Using 3D laser head focal length, can engrave without moving laser head
      Multilevel height clean 3D laser head，can set clean layer for each height directly mark without moving laser head
  • Dynamic Process

    Laser head/workpiece move while cleaning

    1. Normal clean

      Can control laser and motion axes around workpiece to clean

    2. Repetitive clean

      Can set parameter for each clean to perform repetitive clean

    3. Automated component clean

      Can copy machining path and move to specific area for same path clean

    4. Autofocus clean

      Within autofocus range, can always keep laser focus on the surface of workpiece

Selection
Model Platform Ver.LSB-AN3D-200/300-40-55-40-RO-140D Ground Ver.LSB-AN3D-200/300-100-80-80-140L
Product Image    
Laser source Power 200W mopa 300W mopa 200W mopa 300W mopa
Pulse energy Single mode 2mj
Wavelength 1064nm
Frequency / Pulse width 1-3000KHz / 13-500ns
3D Glavo Scan speed ≤14000mm/s
Scan range 140*140mm
Max. Min. Focal length Min.: 215mm , Max: 253.5mm
Virable focal length 38.5mm
Marking position accuracy ≤0.0176mm
User Operation Control System LSB Control System
Teach Pendant Handweel Teach Pendant (6 axes)
Touch Screen 10.1"
Platform
(Customizable)		 Size (Length, Width, Height) 1017*997*1687mm 1518*460*1010mm
Bearing 200kg *
Motion Range X axis: 1-400mm Y axis: 1-550mm Z axis: 1-400mm X axis: 1-1000mm Y axis: 1-800mm Z axis: 1-800mm
Max. Process area 520mm*630mm 1120mm*930mm
Max. process height 330mm 1150mm
Glavo left-right rotate angle Left 39°, Right 39° ±180°
Glavo front-back rotate angle ±100° ±160°
Rotate disc
(optional)		 Diameter 300mm *
Height 70mm *
Bearing 30kg *
Rotate angle 360° *
Applicability Suitable for mold, small workpiece Suitable for large workpieces
Work Demand Cooling Air Cooling
Working Temp. 0~40℃
Power Supply 110~220V，50/60HZ
Power Consumption 2500W
Details 60f92d25b8393.gif